At the store, you may ask assistance in replacing the bearings on your skateboard. But the procedure is quite easy. There should be no problem if you do it yourself. You will need a skate key. If you dont have one, a screwdriver will be fine. Kids bunk beds next, using the screwdriver, pry out the old bearings from the wheels. After that, grab the new bearing and place it at the end of the skate key or screwdriver. Press the bearing into the wheel with even pressure. Do the same to the other wheel. Now put those on the tracks and youre done.

Posted in General | No Comments »

There are no specific standard rating guidelines for skateboard bearings. The most common types of bearings are wheel bearings. By disparate comparison, expert skateboarders estimate the precision of the bearings and know that the good ones fall under 3 or 5, using the ABEC system of rating bearings used in machines. Skateboard these bearings can give you a smooth ride but at the same time, they are strong enough to bear the brunt when you jump on your board. But not all manufacturers consider the ABEC when producing skateboard bearings. You wouldnt really know their performance until you try them out yourself.

Posted in General | No Comments »